Skip to main content

Immediate Action Required for Lead Testing in New York State Schools

Find out what steps you need to take to be compliant

New York schools are now required to test for lead in their water systems before the end of the month. Alarming testing results of the level of lead in water in schools have been in the news lately. Previously, lead in water testing was done on a voluntary basis and, even then, the results were rarely released to the public. States and school districts are scrambling to ensure the safety of the children and staff that utilize the water in these facilities.

Closely following regulations released by the State of New Jersey in July, the State of New York has issued requirements for immediate testing for lead in drinking water of all New York schools. Unlike New Jersey’s more open set of regulations, New York’s are intended for immediate implementation. For schools serving children in any levels of prekindergarten through grade five, sampling must be completed by September 30, 2016. For any school serving children in grades six through twelve, collection of samples must be completed by October 31, 2016.

This less-than-30-day timeframe has schools in New York looking for knowledgeable professionals to guide them through this process more than ever.

Requirements for Initial Testing

This is a new process for most districts and school administrations and there are very strict deadlines.  Here are some of the basic things that you need to know to be compliant:

  • Districts will need to conduct lead sampling and analysis at all drinking water outlets by the above-mentioned dates
  • Drinking water outlets are defined as a potable water fixture currently or potentially used for drinking or cooking purposes, including but not limited to a bubbler, drinking fountain, or faucets
  • It is important to note that any analysis must be conducted by a certified laboratory.

The Environmental Protection Agency’s (EPA) has guidance documents for planning and implementing lead in drinking water sampling in schools, titled “3 T’s for Reducing Lead in Drinking Water in Schools, Revised Technical Guidance”, will be used as a technical reference for implementation of the new regulation. Per this document sampling shall be conducted in accordance with a Lead Sampling Plan and with a Quality Assurance Project Plan (QAPP).

Continue reading the GlobeSt blog here.